DriLyner™ system provides simple and effective techniques for fixing GypBoard™ to bricks, blocks, concrete or sand/cement walls. The system uses ProStick™ adhesive dabs to bond GypBoard™ directly to the walls. Nice appearance and crack-free surface means DriLyner™ can be used in new-build and refurbishment applications.

Excellent External Heat Insulation Performance

Masonry or sand/cement lining walls allow heat transmission from day long sunlight or hot climates into buildings easily. Installing DriLyner™ is an alternative, creating a cavity and producing heat insulation properties. The system also provides fire resistance

Smooth and Seamless Surface Without Cracks

Without cracks, DriLyner™ system provides smooth and seamless surface ready for further decoration.

Lightweight, Quick and Easy to Install
DriLyner™ wall system requires neither reference lining nor side support as conventional sand/cement coating system. Applying Prostick™ adhesive dabs to required areas and position GypBoard™ against the dabs, with quick set property of adhesive, DriLyner™ system enables rapid installation up to 40sq.m/day, which is 4 times faster than sand/cement system. The job site is kept dry and clean. It is ideal for refurbishment or where time is of the essence

High Durability with Standard Quality
ProStick™ Dri-Wall Adhesive is a key material of DriLyner™ system. It is a specially formulated gypsum based adhesive. Its high quality raw materials with standard production technology, ProStick™ Dri-Wall Adhesive gives excellent bonding property between GypBoard™ and any kinds of background, especially bricks, blocks, concrete or sand/cement coated walls.
----------------------------------------------
DriLyner™ System comprises of:
Regular Board
Moisture Resistance Board
Foil Backed
Fire Stop Board
----------------------------------------------
Regular Board
Fire resistance, fire and sound insulation. Standards of TIS 219-2524, ASTM C 36, BS 1230, JIS A 6901, CNS 4458. General ceilings or interior walls

----------------------------------------------
Moisture Resistant Board (MR)
It has an extra property of moisture resistance,because the gypsum board is made from extra tough paper mixed with wax,and the compound of gypsum board has silicone which reduces moisture absorption of the board.The gypsum board will absorb water not more than 5%. Standard of ASTM C 630. External ceilings. Toilet wall covered with ceramic tiles

.

----------------------------------------------

Foil Backed Board
It is a gypsum board that is backed with aluminum foil. It can reflect heat radiation of 95%.Standard of ASTM C 36. Roof or wall ceilings.

----------------------------------------------

Fire Stop Board (FS)
Gypsum compound is mixed with fiberglass that gives property of fire protection. Paper that wraps gypsum board is designed for fire insulation up to 1-3 hours. Standard of ASTM C 36. To be installed in fire exit area,storeroom or a theater. To cover steel structure to prevent deformation of structure in case of fire.

----------------------------------------------
Plaster

ProStick™ Dri-Wall Adhesive
----------------------------------------------
Jointing System
ProFin™ Joint Filler/Finish
ProFin™ Ready-Mix Joint Filler/Finish
----------------------------------------------

Installation for DriLyner™ System 

 
GypWall™ System
GypLyner™ System
DriLyner™ System
 
DriLyner™ System
Gyboard System
Plaster
Jointing System
Installation of DriLyner System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  
Top
 

Copyright © BPB Gypsum Malaysia Sdn Bhd 2006. All rights reserved.
..................................................................................................................................................................................................

Updated On